Skip to content
Eco-Space D.System

FOR HOTELS

Regain control of a system that is creating extra work

An operation is done by hand, an old controller has lost functions, or an incident keeps coming back with no clear cause. With Eco-Space / D.System we review that system and define what we can recover, monitor or automate, making use of the equipment that is still worth keeping.

We can start with a plant room, an area or a single function.

Where your hotel can start

01

An operation left to the staff

For air conditioning, pumps or hot water, we review the signals and the control available to recover or coordinate a function. We define which command should run and how to check that the equipment responds. The aim is to simplify a repetitive task while keeping the protections in place.

02

An incident that is hard to track down

We define which states, temperatures or alarms we need to watch. With reliable data and the functions included, staff can look up what happened and point the technical review in the right direction.

03

Rooms or a refurbishment with specific needs

If rooms are involved, we study setpoints, occupancy and windows where reliable signals exist. The PMS can provide check-ins and check-outs if the integration is viable. We agree the comfort rules with the hotel; a booking and physical presence are two different things.

A control layer that works with what you already have

We build on D.System's experience in controlling hotel systems. Together with your installer and maintenance staff we review the equipment, the wiring and the existing control system. Eco-Space / D.System provides the equipment and the control and automation logic the agreed scope calls for.

If there is a BMS or a PMS, we check access, data, permissions and the supplier's interfaces. We define where the information is viewed and who can act, so that commands do not conflict. Compatibility is verified for the specific equipment and versions.

We use wired connections where practical and consider LoRa where avoiding new communication wiring adds value. Before choosing it we check coverage, power supply, reading frequency and response times. Any works and interruptions needed are specified once the installation has been reviewed.

A first phase that is useful to the hotel

We choose a system or function with a verifiable result: recovering an operation, monitoring a point or automating an agreed task. The phase must be useful in its own right, even if it is never extended.

Once we have reviewed the case, we set out what is proposed, why it is worthwhile, what is kept and what adaptation is needed. Maintenance, management or engineering can review the scope, price, responsibilities, timescale and tests before any work starts. If a prior technical study is needed, we agree its price and deliverables before carrying it out.

We test the functions included and the agreed behaviour if data or communication are lost. If energy savings are to be verified, measurements, period and comparison conditions are agreed separately.

Deployment with the professionals you trust

Deployment is carried out with your installer. We define the solution, coordinate the integration and verify operation. Your installer takes part in the layout and carries out the assembly.

We deliver the equipment needed, configured and programmed in advance when the project requires it, together with its documentation and hands-on training for the installer and the maintenance staff.

We agree the technical support included, the contact channel and how an incident is reported, reviewed and closed. This way the professionals in charge know the installation and can act with our backing, within the agreed scope.

Learn more in the video

6 min 2 s · Audio in Spanish · Optional subtitles · Illustrative images

The video covers facility control, guest rooms and the work of maintenance staff. PMS, AI and advanced monitoring applications are defined according to the data, integrations and functions available in each project.

Read the transcript

Hello, and thank you for giving me these few minutes. Imagine a guest arrives in an hour. You want them to find their room ready, without reception having to keep an eye on everything. For that, the hotel's equipment and information have to work in a coordinated way. I want to show you how we approach it with Eco-Space and D.System, to look after comfort, make better use of energy and make the staff's work easier.

With D.System we have worked on the control of hotel installations, coordinating equipment and automating operations. That experience is our foundation. With Eco-Space we extend the possibilities of connecting that control with what happens in the hotel. And if you already have D.System, we can review with you what you are using and which new applications could make sense for you.

The first thing we do is look at what you already have and how you work, together with the installer and the maintenance staff. We want to make use of the equipment that works, recover functions that have been lost and extend where needed. If you already use another control platform, we study how to integrate with it. And we make clear from the start where the staff will see the information and who will be able to act on each installation.

For example, in the plant room we can study how to coordinate climate control, pumps or hot water according to the hotel's demand. It may be a matter of recovering an operation that is now done by hand, or checking whether a unit responds to the command it receives. We aim to reduce repetitive interventions, always respecting each unit's protections and controls.

In the rooms, the hotel's management software can provide information on expected arrivals and departures. If we have reliable sensors, we can also know whether someone is present or a window is open. With the right integrations, we can define how to prepare the room before arrival, look after comfort during the stay and adjust operation after departure. Each hotel decides its own comfort criteria.

There is one detail I find especially useful. Two rooms may take a long time to cool down for different reasons. One always needs more time and is best prepared earlier. Another, under similar conditions, is taking longer than usual and may need checking. Telling those situations apart helps plan better and detect a possible problem before it ends in a complaint.

This is where we are incorporating artificial intelligence. We want to relate the expected arrival, the temperature and the room's usual behaviour to help decide what to check first. For example, if there is little time left and a room looks unlikely to reach the expected comfort, that situation deserves attention. We define each application according to the data and functions available, under the supervision of the hotel's staff.

From there, we set up complete follow-up for the incident. We want the alert to explain what was detected and help decide the priority. Then, recording what was done and checking how the equipment responds. That way we can assess whether it has recovered or needs further checking. Diagnosis and intervention remain in the technician's hands.

We can also study how to help you organise preventive maintenance, due dates and the history of each piece of equipment. The idea is to make it easier to know what needs doing and to look up what has already been done. We define this module with those responsible for maintenance and according to the functions available, so that it fits into their daily work and helps them guide their checks.

And there is something that is essential for us: making clear who is in control. Who can change a temperature, stop a function or intervene manually. We also define and test what must keep working if a communication fails, data is missing or the agent becomes unavailable. The behaviour in those situations is agreed and verified in each installation.

To connect the equipment, we make use of the infrastructure that already exists. And where running new cables is complicated, we consider a wireless connection with LoRa. That link can work without relying on guest Wi-Fi. Before deploying it we check coverage, power supply and response times. That way we can plan the work bearing in mind that the hotel keeps operating.

We deploy the solution together with the installer. We define the solution and coordinate the integration. The installer takes part in the layout and carries out the assembly. We deliver the equipment needed, configured and programmed in advance when the project requires it, together with its documentation and hands-on training for the installer and the maintenance staff. This way, the professionals in charge know what has been installed, how it works and what to do in the event of an incident, with our technical support according to the agreed scope. That way we make use of existing resources, avoid duplicating work and make future maintenance easier.

What we are after in the end is an improvement you can verify. It may be recovering a function, making the staff's work easier or reducing energy consumption. We have documented hotel experience that we can review with you and assess whether it is comparable to your case. When we talk about savings, we agree what we are going to measure and how to compare the results, taking the hotel's use into account.

My proposal is to start with something specific that is taking up your time today or that you want to control better. You tell us about it, we review the installation with the installer and those responsible for maintenance, and define a first phase with its scope, cost and verification criteria. If it adds value, we can extend it to other zones or other hotels. If these examples made you think of a situation at your hotel, write to us. We can start there.

Before any work starts

Does the whole control system have to be replaced?
We review what works and what can be kept. We identify the adaptations needed and the functions each system takes on before proposing any work.
Can you connect our PMS?
That is checked with the supplier: access, format, fields, refresh rate and permissions. We do not treat a specific hotel integration as validated until that case has been reviewed and tested.
What happens if there is an incident or communication is lost?
We agree what stays under local control, which function is suspended and who can step in. The installer and maintenance staff receive documentation and training; support and incident handling are included under defined conditions.
How will we know it works, and how much it saves?
Functional tests verify the commands, responses and records included. Savings call for a specific energy comparison that takes the hotel's usage into account; passing the control tests does not in itself demonstrate savings.

Tell us which system you need reviewed

Explain what is happening, where, and who knows the installation. Let us know if there is an incident, a refurbishment or a planned date. You don't need a diagnosis or all the technical details yet.